[SOLUCIONADO] Ayuda para configurar DHCP3

Hola, estoy intentando hacer funcionar el DHCP3 en mi ubuntu pero no me sale, al abririlo con: sudo /etc/init.d/dhcp3-server restart me sale esto:
* Stopping DHCP server dhcpd3                                           [fail]
* Starting DHCP server dhcpd3                                                   
  * check syslog for diagnostics.                                             [fail]
                                           
   en el archivo dhcp/dhcp.conf tengo esto:

#
# Sample configuration file for ISC dhcpd for Debian
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#
# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
#

# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;

# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login, You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login;

default-lease-time 600;
max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;

# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.

#subnet 10.152.187.0 netmask 255.255.255.0 {
#}

# This is a very basic subnet declaration.

#subnet 192.168.100.0 netmask 255.255.255.0 {
#  range 192.168.100.11 192.168.100.199;
#  option routers You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login, You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login;
#}

# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {
#  range dynamic-bootp 10.254.239.40 10.254.239.60;
#  option broadcast-address 10.254.239.31;
#  option routers 192.168.100.1;
#}

# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
#  range 10.5.5.26 10.5.5.30;
#  option domain-name-servers You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login;
#  option domain-name "internal.example.org";
#  option routers 10.5.5.1;
#  option broadcast-address 192.168.100.255;
#  default-lease-time 600;
#  max-lease-time 7200;
#}

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
#  hardware ethernet 0:0:c0:5d:bd:95;
#  filename "vmunix.passacaglia";
#  server-name "toccata.fugue.com";
#}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
#  hardware ethernet 08:00:07:26:c0:a5;
#  fixed-address You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login;
#}

# You can declare a class of clients and then do address allocation
# based on that.   The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class "foo" {
#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}

#shared-network 224-29 {
#  subnet 10.17.224.0 netmask 255.255.255.0 {
#    option routers You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login;
#  }
#  subnet 10.0.29.0 netmask 255.255.255.0 {
#    option routers You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login;
#  }
#  pool {
#    allow members of "foo";
#    range 10.17.224.10 10.17.224.250;
#  }
#  pool {
#    deny members of "foo";
#    range 10.0.29.10 10.0.29.230;
#  }
#}



¿alguna idea de lo que pasa?

Gracias

pues no hay manera, no con el metodo para configuar el dhcp. Cuando pruebo de conectarme a la red desde el movil se queda buscando ls ip.

Aguna idea?

Gacias

Buenas, te voy a explicar de la manera q lo hago yo a ver si te funciona. Pongo códigos iniciales por si alguien se une al tema.

$ sudo bash
$ apt-get install dhcp3-server

[/size]

De forma predeterminada, ubuntu ejecutará dicho código cuando se reinicie, para evitarlo poner el siguiente comando:

$ update-rc.d -f dhcp3-server remove
$ cd etc/dhcp3/
$ mv dhcpd.conf dhcpd.conf.stock
$ vim dhcpd.conf

[/size]

Despues necesitarás crear un archivo dhcpd así:

option domain-name-servers 10.0.1.9;
#dominio-nombre-servidor  deben ser evidentemente los de tu servidor DNS demonio
default-lease-time 60;
max-lease-time 72;
ddns-update-style none;
authoritative;
log-facility local7;

subnet 10.0.1.0 netmask 255.255.255.0  {
range 10.0.1.100 10.0.1.200;
option routers 10.0.1.1;
#en este caso nuestra ip era 10.0.1.9; tu ip es muy probable q varie
option domain-name-servers 10.0.1.9;
}

[/size]


Después de todo esto intenta ejecutar el servidor en segundo plano.

$ cd /etc/dhcp3/
$ dhcp3 -cf ./dhcpd-conf -d

[/size]