Hola, estoy intentando hacer funcionar el DHCP3 en mi ubuntu pero no me sale, al abririlo con: sudo /etc/init.d/dhcp3-server restart me sale esto:
* Stopping DHCP server dhcpd3 [fail]
* Starting DHCP server dhcpd3
* check syslog for diagnostics. [fail]
en el archivo dhcp/dhcp.conf tengo esto:
#
# Sample configuration file for ISC dhcpd for Debian
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#
# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
#
# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
default-lease-time 600;
max-lease-time 7200;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
#subnet 10.152.187.0 netmask 255.255.255.0 {
#}
# This is a very basic subnet declaration.
#subnet 192.168.100.0 netmask 255.255.255.0 {
# range 192.168.100.11 192.168.100.199;
# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
#}
# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.
#subnet 10.254.239.32 netmask 255.255.255.224 {
# range dynamic-bootp 10.254.239.40 10.254.239.60;
# option broadcast-address 10.254.239.31;
# option routers 192.168.100.1;
#}
# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
# range 10.5.5.26 10.5.5.30;
# option domain-name-servers ns1.internal.example.org;
# option domain-name "internal.example.org";
# option routers 10.5.5.1;
# option broadcast-address 192.168.100.255;
# default-lease-time 600;
# max-lease-time 7200;
#}
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
#host passacaglia {
# hardware ethernet 0:0:c0:5d:bd:95;
# filename "vmunix.passacaglia";
# server-name "toccata.fugue.com";
#}
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
# hardware ethernet 08:00:07:26:c0:a5;
# fixed-address fantasia.fugue.com;
#}
# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.
#class "foo" {
# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}
#shared-network 224-29 {
# subnet 10.17.224.0 netmask 255.255.255.0 {
# option routers rtr-224.example.org;
# }
# subnet 10.0.29.0 netmask 255.255.255.0 {
# option routers rtr-29.example.org;
# }
# pool {
# allow members of "foo";
# range 10.17.224.10 10.17.224.250;
# }
# pool {
# deny members of "foo";
# range 10.0.29.10 10.0.29.230;
# }
#}
¿alguna idea de lo que pasa?
Gracias
pues no hay manera, no con el metodo para configuar el dhcp. Cuando pruebo de conectarme a la red desde el movil se queda buscando ls ip.
Aguna idea?
Gacias
Buenas, te voy a explicar de la manera q lo hago yo a ver si te funciona. Pongo códigos iniciales por si alguien se une al tema.
$ sudo bash
$ apt-get install dhcp3-server
De forma predeterminada, ubuntu ejecutará dicho código cuando se reinicie, para evitarlo poner el siguiente comando:
$ update-rc.d -f dhcp3-server remove
$ cd etc/dhcp3/
$ mv dhcpd.conf dhcpd.conf.stock
$ vim dhcpd.conf
Despues necesitarás crear un archivo dhcpd así:
option domain-name-servers 10.0.1.9;
#dominio-nombre-servidor deben ser evidentemente los de tu servidor DNS demonio
default-lease-time 60;
max-lease-time 72;
ddns-update-style none;
authoritative;
log-facility local7;
subnet 10.0.1.0 netmask 255.255.255.0 {
range 10.0.1.100 10.0.1.200;
option routers 10.0.1.1;
#en este caso nuestra ip era 10.0.1.9; tu ip es muy probable q varie
option domain-name-servers 10.0.1.9;
}[/size]
Después de todo esto intenta ejecutar el servidor en segundo plano.
$ cd /etc/dhcp3/
$ dhcp3 -cf ./dhcpd-conf -d