Esta sección te permite ver todos los mensajes escritos por este usuario. Ten en cuenta que sólo puedes ver los mensajes escritos en zonas a las que tienes acceso en este momento.
You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or LoginCitarInteresante, lo primero que había pensado, era lo del colibrí xD, por cierto, cómo se llama tu novia? (si se puede, número de teléfono, coordenadas de su casa, y demás datos de interésxDDD)
Lo sentimos mucho, su petición ha sido denegada, esos metadatos son privados.
Saludos,
Kolibrí26
Cita de: CrazyKadeeeemmm, no entiendo a que te refieres pero saludos bro.
Estás muy quemado, sabias?
Cita de: PsymeraPues es una MendelMax 1.5 , te venden el kit para armarla.
es Homemade la impresora?
Cita de: fermino
XD error de dedo, ya lo corregi , saludos
exploit -j
darkspark-suse:/home/darkspark # ifconfig eth0
eth0 Link encap:Ethernet HWaddr F4:6D:04:E6:A5:C9
inet addr:10.0.0.19 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::f66d:4ff:fee6:a5c9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:30332 errors:0 dropped:0 overruns:0 frame:0
TX packets:35152 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:24887182 (23.7 Mb) TX bytes:4054170 (3.8 Mb)
darkspark-suse:/home/darkspark # ifconfig eth0
eth0 Link encap:Ethernet HWaddr F4:6D:04:E6:A5:C9
inet addr:201.157.48.30 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::f66d:4ff:fee6:a5c9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:30332 errors:0 dropped:0 overruns:0 frame:0
TX packets:35152 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:24887182 (23.7 Mb) TX bytes:4054170 (3.8 Mb)
mount /dev/mmc/disk0/part3
cd /optwget http://wd.mirmana.com/prep_optwaresh prep_optware ipkg list | grep http
ipkg install php-thttpdnvram set http_lanport=81
nvram commitdir=/opt/share/www/opt/etc/init.d/S80thttpd start
scp /ruta/del/archivo/web.zip [email protected]:/opt/share/www cd /opt/share/www
unzip web.zip
// If one keypress results in multiple codes being output, then
// change in IRremoteInt.h:
// #define _GAP 50000
#include
int RECV_PIN = 11;
IRrecv irrecv(RECV_PIN);
decode_results results;
void setup()
{
Serial.begin(9600);
irrecv.enableIRIn(); // Start the receiver
}
int c = 1;
void dump(decode_results *results) {
int count = results->rawlen;
Serial.println(c);
c++;
Serial.println("For IR Scope: ");
for (int i = 1; i < count; i++) {
if ((i % 2) == 1) {
Serial.print("+");
Serial.print(results->rawbuf[i]*USECPERTICK, DEC);
}
else {
Serial.print(-(int)results->rawbuf[i]*USECPERTICK, DEC);
}
Serial.print(" ");
}
Serial.println("");
Serial.println("For Arduino sketch: ");
Serial.print("unsigned int raw[");
Serial.print(count, DEC);
Serial.print("] = {");
for (int i = 1; i < count; i++) {
if ((i % 2) == 1) {
Serial.print(results->rawbuf[i]*USECPERTICK, DEC);
}
else {
Serial.print((int)results->rawbuf[i]*USECPERTICK, DEC);
}
Serial.print(",");
}
Serial.print("};");
Serial.println("");
Serial.print("irsend.sendRaw(raw,");
Serial.print(count, DEC);
Serial.print(",38);");
Serial.println("");
Serial.println("");
}
void loop() {
if (irrecv.decode(&results)) {
dump(&results);
irrecv.resume(); // Receive the next value
}
} unsigned int raw[36] = {450,250,200,200,200,550,250,350,250,350,250,200,200,250,200,250,200,250,200,550,200,550,200,400,200,550,250,200,200,250,200,250,200,400,200,};unsigned int uno[36] = {450,250,200,200,200,550,250,350,250,350,250,200,200,250,200,250,200,250,200,550,200,550,200,400,200,550,250,200,200,250,200,250,200,400,200,}; irsend.sendRaw(raw,36,38);#include
#include
SoftwareSerial blueToothSerial(6, 5);
//Inicia la definicion de las varables con los codigos del control remoto
IRsend irsend;
unsigned int vol_up[36] = {
450,250,150,250,200,550,250,350,200,400,250,200,200,250,200,250,200,250,200,550,200,550,200,400,200,550,200,250,200,400,200,250,200,250,200,};
unsigned int vol_do[36] = {
450,250,200,250,200,550,200,400,200,400,200,250,200,200,200,250,200,250,200,550,200,550,200,400,200,550,250,200,200,400,250,200,200,400,200,};
unsigned int ch_up[36] = {
450,250,200,250,200,550,200,400,200,400,200,250,200,250,200,250,150,250,200,550,200,550,250,400,200,550,200,250,200,550,200,250,200,250,150,};
unsigned int ch_do[36] = {
450,250,200,250,200,550,200,400,200,400,200,250,200,250,150,300,150,250,200,250,200,550,200,400,200,550,200,250,200,550,200,250,200,400,200,};
unsigned int un[36] = {450,250,200,200,200,550,250,350,250,350,250,200,200,250,200,250,200,250,200,550,200,550,200,400,200,550,250,200,200,250,200,250,200,400,200,};
unsigned int dot[36] = {450,250,200,250,200,550,200,400,200,400,200,250,200,200,200,300,150,250,200,250,200,550,200,400,200,550,200,250,200,250,200,250,200,550,200,};
unsigned int tre[36] = {450,250,200,250,200,550,200,400,200,400,200,250,200,250,200,250,150,250,200,550,250,500,250,350,250,550,200,250,200,250,200,200,200,750,200,};
unsigned int cua[36] = {500,200,200,250,200,550,200,400,200,400,200,250,250,200,200,250,200,200,200,250,200,550,200,400,200,550,250,200,200,250,200,400,200,250,200,};
unsigned int cin[36] = {450,250,200,250,200,550,200,400,200,400,200,250,200,250,200,200,200,250,200,550,200,550,250,350,250,550,200,250,200,200,200,400,200,400,200,};
unsigned int sei[36] = {450,250,200,250,200,550,200,400,200,400,200,250,200,250,200,250,150,250,200,250,200,550,200,400,200,550,250,200,200,250,200,400,200,550,200,};
unsigned int sie[36] = {450,250,200,200,200,550,250,350,250,350,250,200,200,250,250,250,150,250,200,550,200,550,200,400,200,550,250,200,200,250,200,400,200,700,250,};
unsigned int och[36] = {450,250,200,250,200,550,200,400,200,400,200,250,200,250,200,200,200,250,200,250,200,550,200,400,200,550,200,250,200,250,200,550,200,250,200,};
unsigned int nue[36] = {450,250,200,250,200,550,200,400,200,400,200,250,200,200,200,250,200,250,200,550,200,550,200,400,250,550,200,250,200,200,200,550,250,350,250,};
unsigned int z[36] = {450,250,200,250,200,550,200,400,200,400,200,250,200,250,150,250,200,250,200,250,200,550,200,400,200,550,200,250,200,250,200,250,200,200,200,};
unsigned int po[36] = {500,200,200,250,200,550,200,400,200,400,200,250,200,250,200,250,200,200,250,500,250,550,200,400,200,550,200,250,200,250,200,700,200,250,250,};
unsigned int las[36] = {450,250,200,250,200,550,200,400,200,400,200,250,200,200,200,250,200,250,200,250,200,550,200,400,200,550,200,250,200,250,200,550,200,550,200,};
//Terminamos de definir las variables
int RECV_PIN = 11; //el pin 11 recive la señal del receptor infrarojo
IRrecv irrecv(RECV_PIN);
decode_results results;
void setup()
{
Serial.begin(9600);
irrecv.enableIRIn(); // Start the receiver
blueToothSerial.begin(9600);
}
void loop()
{
char test;
while(1){
if(blueToothSerial.available()){
test = blueToothSerial.read();
ddwrt( test );
}
else if (Serial.available()){
test=Serial.read();
ddwrt(test);
}
}
}
void ddwrt(char test)
{
if( test == '1')
{
Serial.write("numero 1\n");
uno();
}
else if( test == '2')
{
Serial.write("numero 2\n");
dos();
}
else if ( test == '3' )
{
Serial.write("numero 3\n");
tres();
}
else if( test == '4' ){
Serial.write("numero 4\n");
cuatro();
}
else if( test == '5' ){
Serial.write("numero 5\n");
cinco();
}
else if( test == '6' ){
Serial.write("numero 6\n");
seis();
}
else if( test == '7' ){
Serial.write("numero 7\n");
siete();
}
else if( test == '8' ){
Serial.write("numero 8\n");
ocho();
}
else if( test == '9' ){
Serial.write("numero 9\n");
nueve();
}
else if( test == 'z' ){
Serial.write("z\n");
zero();
}
else if( test == 'o' ){
Serial.write("o\n");
power();
}
else if( test == 'l' ){
Serial.write("l\n");
last();
}
else if( test == 'u' ){
Serial.write("u\n");
chanmas();
}
else if( test == 'd' ){
Serial.write("d\n");
chanmenos();
}
else if( test == 'v' ){
Serial.write("v\n");
volmas();
}
else if( test == 'm' ){
Serial.write("m\n");
volmenos();
}
}
//insertamos el codigo para enviar las variables
void uno(){
irsend.sendRaw(un,36,38);
delay(40);
irsend.sendRaw(un,36,38);
delay(40);
irsend.sendRaw(un,36,38);
delay(40);
}
void dos(){
irsend.sendRaw(dot,36,38);
delay(40);
irsend.sendRaw(dot,36,38);
delay(40);
irsend.sendRaw(dot,36,38);
delay(40);
}
void tres(){
irsend.sendRaw(tre,36,38);
delay(40);
irsend.sendRaw(tre,36,38);
delay(40);
irsend.sendRaw(tre,36,38);
delay(40);
}
void cuatro(){
irsend.sendRaw(cua,36,38);
delay(40);
irsend.sendRaw(cua,36,38);
delay(40);
irsend.sendRaw(cua,36,38);
delay(40);
}
void cinco(){
irsend.sendRaw(cin,36,38);
delay(40);
irsend.sendRaw(cin,36,38);
delay(40);
irsend.sendRaw(cin,36,38);
delay(40);
}
void seis(){
irsend.sendRaw(sei,36,38);
delay(40);
irsend.sendRaw(sei,36,38);
delay(40);
irsend.sendRaw(sei,36,38);
delay(40);
}
void siete(){
irsend.sendRaw(sie,36,38);
delay(40);
irsend.sendRaw(sie,36,38);
delay(40);
irsend.sendRaw(sie,36,38);
delay(40);
}
void ocho(){
irsend.sendRaw(och,36,38);
delay(40);
irsend.sendRaw(och,36,38);
delay(40);
irsend.sendRaw(och,36,38);
delay(40);
}
void nueve(){
irsend.sendRaw(nue,36,38);
delay(40);
irsend.sendRaw(nue,36,38);
delay(40);
irsend.sendRaw(nue,36,38);
delay(40);
}
void zero(){
irsend.sendRaw(z,36,38);
delay(40);
irsend.sendRaw(z,36,38);
delay(40);
irsend.sendRaw(z,36,38);
delay(40);
}
void power(){
irsend.sendRaw(po,36,38);
delay(40);
irsend.sendRaw(po,36,38);
delay(40);
irsend.sendRaw(po,36,38);
delay(40);
}
void last(){
irsend.sendRaw(las,36,38);
delay(40);
irsend.sendRaw(las,36,38);
delay(40);
irsend.sendRaw(las,36,38);
delay(40);
}
void volmas(){
irsend.sendRaw(vol_up,36,38);
delay(40);
irsend.sendRaw(vol_up,36,38);
delay(40);
irsend.sendRaw(vol_up,36,38);
delay(40);
}
void volmenos(){
irsend.sendRaw(vol_do,36,38);
delay(40);
irsend.sendRaw(vol_do,36,38);
delay(40);
irsend.sendRaw(vol_do,36,38);
delay(40);
}
void chanmas(){
irsend.sendRaw(ch_up,36,38);
delay(40);
irsend.sendRaw(ch_up,36,38);
delay(40);
irsend.sendRaw(ch_up,36,38);
delay(40);
}
void chanmenos(){
irsend.sendRaw(ch_do,36,38);
delay(40);
irsend.sendRaw(ch_do,36,38);
delay(40);
irsend.sendRaw(ch_do,36,38);
delay(40);
}
You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Logincreo que no me di a entender bien, claro que kate, gedit y kwrite no son mas que editores de texto, pero me refería a que si por ejemplo abrimos un archivo con extencion .c te resalta o cambia de color el texto de las palabras clave, por ejemplo los #include
DarkSpark referente a Gedit y los nombrados no vienen integrado puesto que solo son editores de texto no IDE para desorrollo, si podemos tratar de volverlo pero no del modo correcto ni el uso adecuado de un verdadero IDE!
Regards,
Snifer
You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login
Saludos necesito que me expliquen esto yo procedo a clonar una pagina y meterle el complemento de java para vulnerar la pc del que entre ok pero solo sirve en mi red por que se crea con la ip privada..... hago todo lo que me dice el post del amigo ANTRAX You are not allowed to view links. You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login pero solo puedo ingresar a la pagina clonada por la ip privada 192.168.1.6 como ejemplo yo quiero usar mi ip publica, que tengo que hacer me dijo que tenia que entrar en el directorio de set y configurarlo pero no entiendo como
<?php
$dir="cursos"; //directorio a listar
$list=`ls $dir`;
$listado=trim ($list);
$directorios=explode("\n", $listado);
foreach ($directorios as $dirlist){
$search=`ls $dir/$dirlist/`;
$interior=trim($search);
$int=explode ("\n" , $interior);
echo "$dirlist <br>";
foreach ($int as $archivos){
echo "<li>$archivos</li>";
}
echo "<hr>";
}
?> john --incremental=XXX --stdout=YY >> diccionario.txt
