[SOLUCIONADO] Ayuda para configurar DHCP3

Hola, estoy intentando hacer funcionar el DHCP3 en mi ubuntu pero no me sale, al abririlo con: sudo /etc/init.d/dhcp3-server restart me sale esto:
* Stopping DHCP server dhcpd3                                           [fail]
* Starting DHCP server dhcpd3                                                   
  * check syslog for diagnostics.                                             [fail]
                                           
   en el archivo dhcp/dhcp.conf tengo esto:

#
# Sample configuration file for ISC dhcpd for Debian
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#
# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
#

# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;

# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers No tienes permitido ver los links. Registrarse o Entrar a mi cuenta, No tienes permitido ver los links. Registrarse o Entrar a mi cuenta;

default-lease-time 600;
max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;

# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.

#subnet 10.152.187.0 netmask 255.255.255.0 {
#}

# This is a very basic subnet declaration.

#subnet 192.168.100.0 netmask 255.255.255.0 {
#  range 192.168.100.11 192.168.100.199;
#  option routers No tienes permitido ver los links. Registrarse o Entrar a mi cuenta, No tienes permitido ver los links. Registrarse o Entrar a mi cuenta;
#}

# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {
#  range dynamic-bootp 10.254.239.40 10.254.239.60;
#  option broadcast-address 10.254.239.31;
#  option routers 192.168.100.1;
#}

# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
#  range 10.5.5.26 10.5.5.30;
#  option domain-name-servers No tienes permitido ver los links. Registrarse o Entrar a mi cuenta;
#  option domain-name "internal.example.org";
#  option routers 10.5.5.1;
#  option broadcast-address 192.168.100.255;
#  default-lease-time 600;
#  max-lease-time 7200;
#}

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
#  hardware ethernet 0:0:c0:5d:bd:95;
#  filename "vmunix.passacaglia";
#  server-name "toccata.fugue.com";
#}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
#  hardware ethernet 08:00:07:26:c0:a5;
#  fixed-address No tienes permitido ver los links. Registrarse o Entrar a mi cuenta;
#}

# You can declare a class of clients and then do address allocation
# based on that.   The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class "foo" {
#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}

#shared-network 224-29 {
#  subnet 10.17.224.0 netmask 255.255.255.0 {
#    option routers No tienes permitido ver los links. Registrarse o Entrar a mi cuenta;
#  }
#  subnet 10.0.29.0 netmask 255.255.255.0 {
#    option routers No tienes permitido ver los links. Registrarse o Entrar a mi cuenta;
#  }
#  pool {
#    allow members of "foo";
#    range 10.17.224.10 10.17.224.250;
#  }
#  pool {
#    deny members of "foo";
#    range 10.0.29.10 10.0.29.230;
#  }
#}



¿alguna idea de lo que pasa?

Gracias

pues no hay manera, no con el metodo para configuar el dhcp. Cuando pruebo de conectarme a la red desde el movil se queda buscando ls ip.

Aguna idea?

Gacias

Buenas, te voy a explicar de la manera q lo hago yo a ver si te funciona. Pongo códigos iniciales por si alguien se une al tema.

$ sudo bash
$ apt-get install dhcp3-server

[/size]

De forma predeterminada, ubuntu ejecutará dicho código cuando se reinicie, para evitarlo poner el siguiente comando:

$ update-rc.d -f dhcp3-server remove
$ cd etc/dhcp3/
$ mv dhcpd.conf dhcpd.conf.stock
$ vim dhcpd.conf

[/size]

Despues necesitarás crear un archivo dhcpd así:

option domain-name-servers 10.0.1.9;
#dominio-nombre-servidor  deben ser evidentemente los de tu servidor DNS demonio
default-lease-time 60;
max-lease-time 72;
ddns-update-style none;
authoritative;
log-facility local7;

subnet 10.0.1.0 netmask 255.255.255.0  {
range 10.0.1.100 10.0.1.200;
option routers 10.0.1.1;
#en este caso nuestra ip era 10.0.1.9; tu ip es muy probable q varie
option domain-name-servers 10.0.1.9;
}

[/size]


Después de todo esto intenta ejecutar el servidor en segundo plano.

$ cd /etc/dhcp3/
$ dhcp3 -cf ./dhcpd-conf -d

[/size]